Locate energized and de-energized wires, breakers, and fuses safely and easily with this wire tracer kit which contains a transmitter that works on energized and de-energized circuits up to 600 V AC/DC. In addition, this kit includes a transmitter and receiver, a test lead and accessory kit, a soft carrying case, and a battery.
Locate energized and de-energized wires, breakers, and fuses safely and easily with this wire tracer kit which contains a transmitter that works on energized and de-energized circuits up to 600 V AC/DC. In addition, this kit includes a transmitter and receiver, a test lead and accessory kit, a soft carrying case, and a battery.
Works on energized and de-energized circuits up to 600 V AC/DC in CAT I through III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. In addition, the transmitter features a high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Receiver features
Transmitter features
Applications
Receiver | |
Measurement Category | CAT III 600 V |
Operating | Voltage: 0 to 600 V AC/DC Frequency: Energized: 6.25 kHz; De-energized: 32.768 kHz |
Signal Indications | Numeric, bar graph display and audible beep |
Response Time | Tip sensor (energized/de-energized): 500 ms Battery voltage monitoring: 5 seconds |
Range Detection (Open Air) | Tip sensor (energized): Maximum distance via air: Up to 20' (6.1 m) Pinpointing: approximately 1.97" (5 cm) Tip sensor (de-energized): Maximum distance via air: Up to 14.7' (4.5 m) Pinpointing: approximately 1.97" (5 cm) |
Transmitter | |
Measurement Category | CAT III 600 V |
Operating | Voltage: 0 to 600 V AC/DC Frequency: Energized: 6.25 kHz; De-energized: 32.768 kHz |
Hazardous Voltage Detection | >30 V AC/DC |
Signal Indications | LEDs |
Response Time | Line voltage monitoring: 1 second Battery voltage monitoring: 5 seconds |
Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
General Specifications | |
Display | Size: LCD 2.5" (6.35 cm) Dimensions: 1.45 x 1.93" (36.72 x 48.96 mm) Type: Segment LCD (receiver); LEDs (transmitter) Color: Black and white (receiver); Operating mode/battery status LEDs are red (transmitter) |
Booting Time | Receiver: <3 seconds Transmitter: <2 seconds |
Environmental Conditions | Operating temperature: -4 to 122°F (-20 to 50°C) Storage temperature and humidity: -4 to 158°F (-20 to 70°C), <95% RH Operating altitude: 0 to 6561' (2000 m) Operating humidity 45%: -4 to 50°F (-20 to <10°C) 95%: 50 to <86°F (10 to <30°C) 75%: 86 to <104°F (30 to <40°C) 45%: 104 to 122°F (40 to 50°C) |
Transient Protection | Transmitter: 6 kV (1.2/50 μS surge) |
Pollution Degree | 2 |
IP Rating | Receiver: IP52 Transmitter: IP40 |
Drop Test | 3.28' (1 m) |
Power | Supply: 4 x AA alkaline batteries (receiver); 8 x AA alkaline batteries (transmitter Consumption (typical) Receiver: 70 mA Transmitter: Hi mode: 70 mA Loop mode with clamp: 90 mA Consumption without signal transmission: 10 mA |
Battery Life | Receiver: Approximately 25 hours Transmitter: 70 mA (Hi mode); Approximately 18 hours (loop mode) Low battery indication: Yes |
Fuse | 1.6 A, 700 V, fast-acting, Ø6 x 32 mm (transmitter) |
Dimensions | Receiver: Approximately 7.2 x 2.95 x 1.69" (183 x 75 x 43 mm) Transmitter: Approximately 7.2 x 3.66 x 1.97" (183 x 93 x 50 mm) |
Weight | Receiver: Approximately 0.6 lbs (0.27 kg) Transmitter: Approximately 1.25 lbs (0.57 kg) |
Receiver | |
Measurement Category | CAT III 600 V |
Operating | Voltage: 0 to 600 V AC/DC Frequency: Energized: 6.25 kHz; De-energized: 32.768 kHz |
Signal Indications | Numeric, bar graph display and audible beep |
Response Time | Tip sensor (energized/de-energized): 500 ms Battery voltage monitoring: 5 seconds |
Range Detection (Open Air) | Tip sensor (energized): Maximum distance via air: Up to 20' (6.1 m) Pinpointing: approximately 1.97" (5 cm) Tip sensor (de-energized): Maximum distance via air: Up to 14.7' (4.5 m) Pinpointing: approximately 1.97" (5 cm) |
Transmitter | |
Measurement Category | CAT III 600 V |
Operating | Voltage: 0 to 600 V AC/DC Frequency: Energized: 6.25 kHz; De-energized: 32.768 kHz |
Hazardous Voltage Detection | >30 V AC/DC |
Signal Indications | LEDs |
Response Time | Line voltage monitoring: 1 second Battery voltage monitoring: 5 seconds |
Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
General Specifications | |
Display | Size: LCD 2.5" (6.35 cm) Dimensions: 1.45 x 1.93" (36.72 x 48.96 mm) Type: Segment LCD (receiver); LEDs (transmitter) Color: Black and white (receiver); Operating mode/battery status LEDs are red (transmitter) |
Booting Time | Receiver: <3 seconds Transmitter: <2 seconds |
Environmental Conditions | Operating temperature: -4 to 122°F (-20 to 50°C) Storage temperature and humidity: -4 to 158°F (-20 to 70°C), <95% RH Operating altitude: 0 to 6561' (2000 m) Operating humidity 45%: -4 to 50°F (-20 to <10°C) 95%: 50 to <86°F (10 to <30°C) 75%: 86 to <104°F (30 to <40°C) 45%: 104 to 122°F (40 to 50°C) |
Transient Protection | Transmitter: 6 kV (1.2/50 μS surge) |
Pollution Degree | 2 |
IP Rating | Receiver: IP52 Transmitter: IP40 |
Drop Test | 3.28' (1 m) |
Power | Supply: 4 x AA alkaline batteries (receiver); 8 x AA alkaline batteries (transmitter Consumption (typical) Receiver: 70 mA Transmitter: Hi mode: 70 mA Loop mode with clamp: 90 mA Consumption without signal transmission: 10 mA |
Battery Life | Receiver: Approximately 25 hours Transmitter: 70 mA (Hi mode); Approximately 18 hours (loop mode) Low battery indication: Yes |
Fuse | 1.6 A, 700 V, fast-acting, Ø6 x 32 mm (transmitter) |
Dimensions | Receiver: Approximately 7.2 x 2.95 x 1.69" (183 x 75 x 43 mm) Transmitter: Approximately 7.2 x 3.66 x 1.97" (183 x 93 x 50 mm) |
Weight | Receiver: Approximately 0.6 lbs (0.27 kg) Transmitter: Approximately 1.25 lbs (0.57 kg) |