- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Suitable for network cabling project installation and maintenance, computer room detection and maintenance, and CCTV system installation, this network tester features a built-in TDR test for opens, shorts, and length on UTP, CAT 6e/5e, BNC, and telephone line cable. In addition, this tester has a 2.4" (60.96 mm) TFT-LCD.
Suitable for network cabling project installation and maintenance, computer room detection and maintenance, and CCTV system installation, this network tester features a built-in TDR test for opens, shorts, and length on UTP, CAT 6e/5e, BNC, and telephone line cable. In addition, this tester has a 2.4" (60.96 mm) TFT-LCD.
Work on combined network ping testing, port flashing, and IP address scanning with this tester that quickly identifies connected network port speed (10/100/1000 M) and detects duplex mode (full or half). Search and identify the correct UTP or BNC cable from a bundle with this tester's built-in cable tracer. In addition, this tester features a secondary code digital mode for rejecting noise and false signals to help easily and quickly locate cables.
Features
Applications
| Display | 2.4" (60.96 mm) TFT-LCD screen, 320 x 240 resolution |
| Cable | UTP test: Test UTP cable's sequence, type and remote kit, quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector Type: RJ45 twisted pair, RJ11 telephone line, BNC cable TDR test: Tests for opens, shorts and length (1.2 km maximum) on UTP, CAT 6e/5e, BNC and telephone line cable RJ45: Test cable pair status, length, attenuation, reflectivity, impedance, skew (590.551' [180 m] maximum) |
| RJ45 Connector Fault | Can determine the fault point of RJ45 cable connector from local/remote indicator light |
| Port Flash | Sends a unique signal to make the connected LAN port of the switch flash |
| Ping Test | Check to see if the IP camera's ethernet port is working normally and if the IP address is correct |
| IP Scan | Quickly find the IP address of the camera or other network equipment which connected to the meter |
| Link Monitor | Quickly identify connected network port speed (10/100/1000 M), and detect duplex mode (full or half) |
| Video Level Meter Test | Detects the peak, sync and burst level of TVI, CVI, AHD, CVBS video signals in real time |
| Power | Meter: 5 V/1 A AC adapter or 3.7 V li-on battery Tracer probe: 2 x AA batteries (not included) |
| Dimensions | 5 x 3.3 x 1.3" (126 x 83 x 33 mm) |
| Weight | 0.75 lbs (340 g) |
| Display | 2.4" (60.96 mm) TFT-LCD screen, 320 x 240 resolution |
| Cable | UTP test: Test UTP cable's sequence, type and remote kit, quickly detect the near-end, mid-end and far-end fault point of RJ45 cable connector Type: RJ45 twisted pair, RJ11 telephone line, BNC cable TDR test: Tests for opens, shorts and length (1.2 km maximum) on UTP, CAT 6e/5e, BNC and telephone line cable RJ45: Test cable pair status, length, attenuation, reflectivity, impedance, skew (590.551' [180 m] maximum) |
| RJ45 Connector Fault | Can determine the fault point of RJ45 cable connector from local/remote indicator light |
| Port Flash | Sends a unique signal to make the connected LAN port of the switch flash |
| Ping Test | Check to see if the IP camera's ethernet port is working normally and if the IP address is correct |
| IP Scan | Quickly find the IP address of the camera or other network equipment which connected to the meter |
| Link Monitor | Quickly identify connected network port speed (10/100/1000 M), and detect duplex mode (full or half) |
| Video Level Meter Test | Detects the peak, sync and burst level of TVI, CVI, AHD, CVBS video signals in real time |
| Power | Meter: 5 V/1 A AC adapter or 3.7 V li-on battery Tracer probe: 2 x AA batteries (not included) |
| Dimensions | 5 x 3.3 x 1.3" (126 x 83 x 33 mm) |
| Weight | 0.75 lbs (340 g) |
