- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
With this single workstation monitor, you can continuously monitor the path-to-ground integrity of 2 operators and 1 conductive or dissipative worksurface. It's designed and tested for use with SCS dual-wire wrist straps and worksurface mats (each sold separately).
With this single workstation monitor, you can continuously monitor the path-to-ground integrity of 2 operators and 1 conductive or dissipative worksurface. It's designed and tested for use with SCS dual-wire wrist straps and worksurface mats (each sold separately).
Features
| Workstation Monitor Dimensions | 6.5 x 3.125 x 1.375" (16.5 x 7.9 x 3.5cm) |
| Operator Remote Dimensions | 2.75 x 1 x 1" (7 x 2.5 x 2.5cm) |
| Output Plug Polarization | Center Negative |
| Test Voltage | 9 VDC / 16VDC Open circuit (Typical Value) |
| Test Current | Less than 3microamps (Typical Value) |
| Operating Temperature | 50 to 110°F (10 to 43°C) |
| Humidity | Maximum relative humidity 80% for temperatures up to 31°C to 50% relative humidity at 40°C |
| Workstation Monitor Dimensions | 6.5 x 3.125 x 1.375" (16.5 x 7.9 x 3.5cm) |
| Operator Remote Dimensions | 2.75 x 1 x 1" (7 x 2.5 x 2.5cm) |
| Output Plug Polarization | Center Negative |
| Test Voltage | 9 VDC / 16VDC Open circuit (Typical Value) |
| Test Current | Less than 3microamps (Typical Value) |
| Operating Temperature | 50 to 110°F (10 to 43°C) |
| Humidity | Maximum relative humidity 80% for temperatures up to 31°C to 50% relative humidity at 40°C |
