Offers surface roughness measurement in both X and Y-axes, this user-friendly surface roughness tester features a measuring force of 0.75 mN and can be brought with you anywhere. Allows users to view surface roughness waveforms on the built-in LCD and can perform measurements in any orientation, including vertical and upside-down.
Offers surface roughness measurement in both X and Y-axes, this user-friendly surface roughness tester features a measuring force of 0.75 mN and can be brought with you anywhere. Allows users to view surface roughness waveforms on the built-in LCD and can perform measurements in any orientation, including vertical and upside-down.
Highly versatile and delivers accurate measurements at high speeds, this surface roughness tester is full of features and capabilities that enhance productivity.
Features
Extensive display features that assist measurement
Advanced data storage capabilities
Up to 10 measurement conditions can be stored in the internal memory. Conditions can be quickly read according to the workpiece.
Stylus alarm function
An alarm warns you when the cumulative measurement distance exceeds a preset limit. This feature can be used to prevent problems that would be caused by worn out styli. Any value can be specified as the limit.
Easy setting
Displayed settings can be easily changed by pressing the left and right arrow keys under the sliding cover. For example, these keys can be used to switch the cut-off value (λc) and the number of sampling lengths (N) on the measurement screen.
Setting parameters and recalculating results
The required parameters can be selected from the screen. The sub-menu also lets you specify detailed settings such as the tolerance. After completing measurement, the parameters can be changed and calculation can be executed again using the new parameters.
Applications
Measuring Range | X axis: 0.63" (16 mm) Z axis (detector) Range: 14400 µin (-7900 to 6300 µin) [360 µm (-200 to 160 µm)] Range/resolution: 14400/0.8 µin (360/0.02 µm); 4000/0.2 µin (100/0.006 µm); 1000/0.08 µin (25/0.002 µm) |
Measuring Speed | When measuring: 0.01, 0.02, 0.03 in/s (0.25, 0.5, 0.75 mm/s) When returning: 04 in/s (1 mm/s) |
Measuring Force/Stylus Tip | 0.75 mN/2 µmR 60° |
Skid Force | Less than 400 mN |
Applicable Standards | JIS '82/JIS '94/JIS '01/ISO '97/ANSI/VDA |
Assessed Profiles | Primary profile, roughness profile, DF profile, roughness profile-Motif |
Parameters | Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize |
Graph Analysis | Bearing area curve/Amplitude distribution curve |
Filters | Gaussian, 2CR75, PC75 |
Cut Off Length | λc: 0.003, 0.01, 0.03, 0.1" (0.08, 0.25, 0.8, 2.5 mm) λs: 100, 300 µin (2.5, 8 µm) |
Sampling Length | 0.003, 0.01, 0.03, 0.1" (0.08, 0.25, 0.8, 2.5 mm) |
Number of Sampling Lengths | x1, x2, x3, x4, x5, x6, x7, x8, x9, x10 Arbitrary 0.01 to 0.63" (0.0001" interval) [(0.3 to 16 mm: 0.01 mm interval)] |
LCD | 1.45 x 1.93" (36.7 x 48.9 mm) |
Display Languages | Japanese, English, German, French, Italian, Spanish, Portuguese, Korean, Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch |
Measurement Result Display | Vertical: 1-parameter display/3-parameter display/Trace display Horizontal: 1-parameter display/4-parameter display/Trace display (invertible) |
External I/O | USB I/F, Digimatic Output, Printer Output, RS-232C I/F, Foot SW I/F |
Functions | Customization: Desired parameters can be selected for calculation and display GO/NG judgment: By maximum value/16 %/Standard deviation Storage of measurement condition: Save the conditions at power OFF Storage: Internal memory: Measurement condition (10 sets) Calibration: Auto-calibration with the entry of numerical value/average calibration with multiple measurement (maximum 5 times) is available |
Power-saving Function | Auto-sleep off function (10 to 600 seconds) |
Power Supply | Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter Charging time: about 4 hours (may vary due to ambient temperature) Endurance: about 1000 measurements (differs slightly due to use conditions/environment) |
Dimensions | Display unit: 2.05 x 2.6 x 6.3" (52.1 x 65.8 x 160 mm), sliding cover closed, detector not mounted Drive unit: 4.5 x .9 x 1.02" (115 x 23 x 26 mm), detector not mounted |
Weight | About 1.1 lbs (500 g) |
Click on a category to view a selection of compatible accessories with the Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 0.75 mN.
Measuring Range | X axis: 0.63" (16 mm) Z axis (detector) Range: 14400 µin (-7900 to 6300 µin) [360 µm (-200 to 160 µm)] Range/resolution: 14400/0.8 µin (360/0.02 µm); 4000/0.2 µin (100/0.006 µm); 1000/0.08 µin (25/0.002 µm) |
Measuring Speed | When measuring: 0.01, 0.02, 0.03 in/s (0.25, 0.5, 0.75 mm/s) When returning: 04 in/s (1 mm/s) |
Measuring Force/Stylus Tip | 0.75 mN/2 µmR 60° |
Skid Force | Less than 400 mN |
Applicable Standards | JIS '82/JIS '94/JIS '01/ISO '97/ANSI/VDA |
Assessed Profiles | Primary profile, roughness profile, DF profile, roughness profile-Motif |
Parameters | Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize |
Graph Analysis | Bearing area curve/Amplitude distribution curve |
Filters | Gaussian, 2CR75, PC75 |
Cut Off Length | λc: 0.003, 0.01, 0.03, 0.1" (0.08, 0.25, 0.8, 2.5 mm) λs: 100, 300 µin (2.5, 8 µm) |
Sampling Length | 0.003, 0.01, 0.03, 0.1" (0.08, 0.25, 0.8, 2.5 mm) |
Number of Sampling Lengths | x1, x2, x3, x4, x5, x6, x7, x8, x9, x10 Arbitrary 0.01 to 0.63" (0.0001" interval) [(0.3 to 16 mm: 0.01 mm interval)] |
LCD | 1.45 x 1.93" (36.7 x 48.9 mm) |
Display Languages | Japanese, English, German, French, Italian, Spanish, Portuguese, Korean, Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch |
Measurement Result Display | Vertical: 1-parameter display/3-parameter display/Trace display Horizontal: 1-parameter display/4-parameter display/Trace display (invertible) |
External I/O | USB I/F, Digimatic Output, Printer Output, RS-232C I/F, Foot SW I/F |
Functions | Customization: Desired parameters can be selected for calculation and display GO/NG judgment: By maximum value/16 %/Standard deviation Storage of measurement condition: Save the conditions at power OFF Storage: Internal memory: Measurement condition (10 sets) Calibration: Auto-calibration with the entry of numerical value/average calibration with multiple measurement (maximum 5 times) is available |
Power-saving Function | Auto-sleep off function (10 to 600 seconds) |
Power Supply | Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter Charging time: about 4 hours (may vary due to ambient temperature) Endurance: about 1000 measurements (differs slightly due to use conditions/environment) |
Dimensions | Display unit: 2.05 x 2.6 x 6.3" (52.1 x 65.8 x 160 mm), sliding cover closed, detector not mounted Drive unit: 4.5 x .9 x 1.02" (115 x 23 x 26 mm), detector not mounted |
Weight | About 1.1 lbs (500 g) |
Click on a category to view a selection of compatible accessories with the Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 0.75 mN.