With up to 0.05% of reading accuracy of differential pressure, this reference recorder has a 15,000 psi range. Used to calibrate anywhere and accurately to replace a deadweight tester. Additionally, it is rugged enough to sit in 3' of water and has a temperature module.
With up to 0.05% of reading accuracy of differential pressure, this reference recorder has a 15,000 psi range. Used to calibrate anywhere and accurately to replace a deadweight tester. Additionally, it is rugged enough to sit in 3' of water and has a temperature module.
Perform complete tests and calibration anywhere.
Features
Applications
Upper Module | Pressure Range: 15,000 psi Accuracy: 0 to 30% of Range: ± (0.015% of full scale) 30 to 110% of range: ± (0.05% of reading) |
Lower Module | RTD100 Temperature Module |
Resistance Input | Accuracy: ± (0.015% of rdg + 0.02 Ω) Range: 0 to 400 Ohms range for use with 100 Ohm PRTs Resolution: 0.01 on all scales Units: °C, K, °F, R, Ω TCRs: 0.003850 Ω/Ω/°C (IEC 60751), 0.003911 Ω/Ω/°C (US Industrial Std), 0.003926 Ω/Ω/°C Wiring: 2-, 3-, 4-wire support Connection: M8 connector cable or terminal block |
Sensor | Wetted materials: (wrench tight) 316 stainless steel, (finger tight) 316 stainless steel Viton (internal o-ring) Diaphragm seal fluid: silicone oil Connection: crystal CPF female |
Display | Screen: 255 x 160 pixel graphical display Display rate: 4 readings/second (standard) up to 10 readings/second (recording) |
Digital Interface | Mini-USB |
Data Logging | Capacity: approximately 1,000,000 data points Storage type: Non-volatile flash memory Fastest interval: 10 per second Slowest interval: 1 per hour |
Enclosure | Rating: IP66 and IP67 Housing: impact resistant injection molded Keypad and labels: UV resistant polyester Mounting: M4 x 0.7 [0.31" (8 mm)] deep threaded insert mounting locations |
Power | 4 x AA: 200 hours, typical Ultra low power: Up to 60 days, typical |
Weight | 1.5 lb (680 g) |
Upper Module | Pressure Range: 15,000 psi Accuracy: 0 to 30% of Range: ± (0.015% of full scale) 30 to 110% of range: ± (0.05% of reading) |
Lower Module | RTD100 Temperature Module |
Resistance Input | Accuracy: ± (0.015% of rdg + 0.02 Ω) Range: 0 to 400 Ohms range for use with 100 Ohm PRTs Resolution: 0.01 on all scales Units: °C, K, °F, R, Ω TCRs: 0.003850 Ω/Ω/°C (IEC 60751), 0.003911 Ω/Ω/°C (US Industrial Std), 0.003926 Ω/Ω/°C Wiring: 2-, 3-, 4-wire support Connection: M8 connector cable or terminal block |
Sensor | Wetted materials: (wrench tight) 316 stainless steel, (finger tight) 316 stainless steel Viton (internal o-ring) Diaphragm seal fluid: silicone oil Connection: crystal CPF female |
Display | Screen: 255 x 160 pixel graphical display Display rate: 4 readings/second (standard) up to 10 readings/second (recording) |
Digital Interface | Mini-USB |
Data Logging | Capacity: approximately 1,000,000 data points Storage type: Non-volatile flash memory Fastest interval: 10 per second Slowest interval: 1 per hour |
Enclosure | Rating: IP66 and IP67 Housing: impact resistant injection molded Keypad and labels: UV resistant polyester Mounting: M4 x 0.7 [0.31" (8 mm)] deep threaded insert mounting locations |
Power | 4 x AA: 200 hours, typical Ultra low power: Up to 60 days, typical |
Weight | 1.5 lb (680 g) |