Oscilloscope current probe for applications in industrial and power environments. Analyze, measure and accurately display distorted current waveforms and harmonics.
Oscilloscope current probe for applications in industrial and power environments. Analyze, measure and accurately display distorted current waveforms and harmonics.
The Model JM861 is designed for oscilloscopes, waveform displaying instruments and other instruments able to benefit from its frequency response. The Model JM861 encompasses a special circuit and three ranges to maximize frequency response performance. Accurately measures AC current waveforms and has proportional mV output for direct readings on oscilloscopes. Three-position slide switch on the handle selects ranges. Large jaw window enables use on cables and bus bars.
Features
Applications
Nominal Range | 3000A |
Measurement Range | 1 to 3600A |
Transformation Ratio | 3000:3 |
Output Signal | 1mA AC/A AC (3A at 3000A) |
Accuracy (1000A Range) | 150A: 1.5% of Reading 600A: 0.75% of Reading 3000A: 0.5% of Reading |
Phase Shift (1000A Range) | 150A: 1.5° 600A: 0.75°; 3000A: 0.5° |
Overload | 3600A for 5 min |
Frequency Range | 30Hz to 5kHz Current derating above 1kHz for continuous use |
Load Impedance | ≤0.6Ω |
Working/Common Mode Voltage | 600V AC |
Output Termination | 5ft Lead |
Nominal Range | 3000A |
Measurement Range | 1 to 3600A |
Transformation Ratio | 3000:3 |
Output Signal | 1mA AC/A AC (3A at 3000A) |
Accuracy (1000A Range) | 150A: 1.5% of Reading 600A: 0.75% of Reading 3000A: 0.5% of Reading |
Phase Shift (1000A Range) | 150A: 1.5° 600A: 0.75°; 3000A: 0.5° |
Overload | 3600A for 5 min |
Frequency Range | 30Hz to 5kHz Current derating above 1kHz for continuous use |
Load Impedance | ≤0.6Ω |
Working/Common Mode Voltage | 600V AC |
Output Termination | 5ft Lead |